Home > Manufacturers > Eaton > Safety Switches > Heavy Duty

Heavy Duty
6-Pole Motor Circuit EnviroLine
Eaton's 6-pole Motor Circuit Heavy Duty Safety Switch is a compact safety switch ideal for use in heavy industry when a disconnecting means is required for two-speed motors that are remote from their motor control devices. Available 30A to 200A, fusible or non-fusible.

more info
Eaton’s EnviroLine is primarily used where water is frequently used to hose down equipment. Window switches provide visual verification of ON/OFF status and fuse status. Receptacle switches are pre-wired and interlocked to polarized receptacles for three-phase, three-wire, grounded type power plugs.

more info
Fusible Non-Fusible
Eaton’s Heavy Duty Fusible Safety Switches offer the ability to manually open and close a circuit and provide overcurrent protection by means of field-installed fuses. Switches are 100% load break and 100% load make rated and are suitable for service entrance use.

more info
Eaton’s Heavy Duty Non-fusible Safety Switches provide a means to manually connect or disconnect the load from the source. The heavy duty non-fusible safety switch is available in a variety of enclosures including NEMA 1, 3R, 12, 4, and 4X.

more info
Heavy duty safety switches are used in commercial, institutional, and industrial applications where reliable performance and service continuity are critical. Rated 30-1200A with a visible double break rotary blade mechanism. All heavy-duty switches are load-break rated.

Non-Fusible

Eaton's Heavy Duty Non-fusible Safety Switches provide a means to manually connect or disconnect the load from the source. The heavy duty non-fusible safety switch is available in a variety of enclosures, including NEMA 1, 3R, 12, 4, and 4X.

Fusible

Heavy duty fusible safety switches offer the ability to manually open and close a circuit and provide overcurrent protection through field installed fuses. Fuse pullers are built-in on NEMA 4X and NEMA 12 enclosures through 200 amperes.

316-Grade Stainless Switches

Eaton's 316-Grade Stainless Steel Switches offer enhanced corrosion resistance over standard 304 grade stainless steel switches. They are used on exposed surfaces and hardware. Ideal for marine environments and water/wastewater applications.

Mill Duty

Mill duty safety switches are offered for the toughest in heavy commercial and industrial applications. They are available in a NEMA 12 enclosure, industrial dust-tight or stainless steel NEMA 4X enclosure. Available from 30A to 600A and as fusible or non-fusible. Suitable for service entrance use.

6-Pole Motor Circuit

Eaton's 6-pole Motor Circuit is a compact safety switch that's ideal for use in heavy industry when a disconnecting means is required for two-speed motors that are remote from their motor control devices. It offers an ampere range of 30 to 200, fusible or non-fusible.

:search>